01
Stone & marble
Italian and Indian marble, granite, quartz, quartzite, onyx, sintered stone and terrazzo.
Advanced surface protection
Protect the Finish.
Preserve the Surface.
High-clarity Surface Protection Film for premium stone, furniture and architectural surfaces—professionally installed to help protect valuable finishes from everyday scratches, stains, spills, abrasion and routine wear.
Stone · Furniture · Kitchens · Offices · Hotels · Retail
High clarityPhysical protection
The Casaveora difference
Honed before.
Protected gloss after.
Scroll to apply the filmFILM APPLIEDSame marble.
Same marble.
A deeper protected finish.
Honed · UnprotectedApplication edgeGloss · Film applied
01
The problem
Exceptional finishes still live in the real world.
Beautiful surfaces are exposed to movement, spills, cleaning, impact and constant touch. Restoring or replacing them can be expensive, disruptive and imperfect.
01Scratches
02Stains & etching
03Cleaning damage
04Loss of gloss
05Expensive replacement
Protection designed around the surface
One system. Different material realities.
Every material behaves differently. We inspect the finish, coating, edges and intended use before recommending a system.
02
Dining & furniture
Dining, coffee and console tables, office desks, PU-polished and selected lacquered finishes.
03
Kitchen surfaces
Countertops, islands, high-gloss shutters, acrylic panels and selected appliance surfaces.
04
Hotels & commercial
Reception counters, retail displays, lift interiors and frequently used public-facing surfaces.
Everyday use
Everyday protection for exceptional surfaces
The damage usually begins with ordinary things.
Phones, keys, crockery, coffee, cosmetics and toys meet expensive finishes every day. Casaveora puts a replaceable layer between them.
01
Phone & keys
Placed down hundreds of times. One sharp edge is enough to leave a mark.
02
Crockery
Heavy bowls and plates are usually slid—not carefully lifted.
03
Coffee spills
A spill can remain on valuable stone before anyone notices.
04
Makeup & cosmetics
Pigments, oils and cosmetics meet premium vanities every day.
05
Children’s toys
Play does not stop at the edge of a stone coffee table.
06
Easy wipe-clean care
Everyday mess should be easier to remove from the protected layer.
Scratch resistance
Helps receive light scratches, scuffing and everyday abrasion before they reach the original finish.
Stain barrier
Creates a physical barrier against tea, coffee, oil, sauces and cosmetics on the covered area.
Minor impact
Absorbs a degree of minor impact and abrasion from routine handling.
Easier maintenance
A soft microfibre cloth and mild cleaner are generally enough for routine care.
Finish preservation
High clarity keeps colour, veining, grain and craftsmanship visible.
Gloss or matte
Selected films can complement polished, satin and approved matte surfaces.
SPF is damage-resistant, not indestructible. It does not replace chopping boards, coasters, trivets or sensible surface care.
A real-world protection story
The spill happens.
The finish does not have to suffer.
01Coffee meets the surfaceWithout a barrier, the finish receives the exposure directly.
02Wipe the protected layerThe mess stays where it can be cleaned.
03Return to the original finishClean, clear and visually unchanged beneath the film.
Material & technology
A clear physical layer, engineered in depth.
Depending on the surface, Casaveora may specify high-clarity TPU or another specialist architectural film. A film that works on automotive paint is not automatically suitable for marble, veneer, PU polish or architectural coatings.
- Typical selected-film thickness: approximately 160–200 microns
- Gloss, satin and selected matte options
- Adhesive compatibility checked against the actual finish
- Specification stated in the individual quotation
01 Protective topcoatStain, contamination and abrasion resistance02 Flexible film bodyHigh-clarity TPU or specified architectural film03 Pressure-sensitive adhesiveOptically clear and surface-compatible04 Release linerRemoved during professional installation05 Your finished surfaceClose-up of natural marble
Natural marble
Why SPF?
Three treatments.
Three different jobs.
The difference is what each treatment physically does to the surface.
BeforeAfter polishing
Restores appearance.
It removes or refines the damaged top layer, but the restored finish remains directly exposed.
Liquid beads above
Reduces absorption.
It penetrates the pores and slows liquid entry, but it does not create a scratch-resistant physical shield.
Replaceable film above
Receives the wear.
It places a clear, replaceable physical layer between everyday use and the original finish.
How it works
Precision from first look to final handover.
01
Surface assessment
Surface assessment
We identify the material, coating, condition, finish, dimensions, edges, joints and intended use.
Compatibility review
The surface is classified as recommended, assessment required or not normally recommended.
Surface preparation
It is carefully cleaned and decontaminated; existing defects are photographed before work begins.
Measurement & templating
The film is planned around the shape, corners, edges, joints, cut-outs and available roll width.
Controlled installation
Wet, reduced-moisture or alternative installation is selected according to surface sensitivity.
Edge finishing
Edges are wrapped, set back or protected separately according to profile and moisture risk.
Quality inspection
We inspect alignment, optical clarity, contamination, bubbles, seams and edge termination.
Care guidance
You receive curing guidance, maintenance instructions and the applicable warranty terms.
Which method is right?
Restore, seal, shield—or separate.
| Solution | Scratch protection | Stain protection | Replaceable | Adds thickness | Typical role |
|---|---|---|---|---|---|
| Polishing | No | No | No | No | Restores appearance |
| Stone sealer / nano coating | Limited | Yes | Reapplication | No | Reduces absorption |
| Casaveora SPF | Stronger | Stronger barrier | Yes | Yes | Physical protection |
| Protective glass | Strong | Strong | Yes | Significant | Heavy tabletop protection |
Selected applications
Five spaces. Five different surface stories.
Representative project visuals for the working launch portfolio. Each case is presented with a different material, setting and use pattern.
01 · Mumbai
Rustomjee Group private residence
Marble dining table
02 · Indore
Private residence
Quartzite kitchen counter
03 · Indore
Boutique hospitality project
Stone reception counter
04 · Mumbai
Corporate interior
Executive conference table
05 · Mumbai
Luxury retail interior
Onyx display counter
Concept portfolio imagery created for the pre-launch website. Replace with verified installation photography as the project library develops.
Clear protection. Clear expectations.
What SPF does not do.
- It is scratch-resistant, not scratch-proof.
- It does not repair existing cracks, scratches or stains.
- It is not a substitute for trivets or chopping boards.
- It does not waterproof joints, edges or structures.
- Oversized surfaces may require a planned seam.
- Deep curves and carved details may not be fully covered.
- Not every stone, coating or furniture finish is compatible.
- Appearance may change slightly in certain lighting.
European-inspired precision for exceptional interiors
Preservation, with quiet confidence.
Casaveora is shaped by European principles of material preservation—restraint, precision and respect for the original finish—combined with surface-specific assessment and controlled installation.
Surface firstWe begin with the material—not a predetermined product.Honest recommendationsWe do not claim every surface is suitable.Controlled installationPreparation, templating and finishing follow a defined process.Long-term thinkingMethods are tested, repeated and improved.
Questions, answered
Good protection starts with clarity.
Ten important answers here. The complete guidance library is available on the FAQ page.
View all FAQs →A transparent engineered layer installed over a compatible finish. It receives everyday wear while keeping the original material visible.
The technology may be related, but stone and furniture need different compatibility checks, moisture control, templating and edge decisions.
Selected marble, granite, quartz, quartzite, onyx, sintered stone, glass, acrylic, laminate, metal and finished furniture may be suitable.
No. Raw wood, damp or porous stone, weak polish, damaged lacquer and exposed MDF or veneer edges may not be suitable.
It is highly transparent, but may slightly change gloss, reflection, texture or colour depth under certain lighting.
No. It resists routine scratches and abrasion, but knives, sharp metal, heavy dragging or excessive force can cut it.
The covered area prevents many spills from directly contacting the finish, but exposed edges, joints and cut-outs still require prompt cleaning.
It tolerates normal indoor use and moderate warmth. Hot cookware and appliances must still use trivets or mats.
Yes when the top fits within the film width. Deep curves may need a controlled setback or separate perimeter strip.
Professional removal is intended from compatible, stable surfaces. Results depend on adhesive age and the condition of the finish below.
Start with the surface
Is your surface suitable for protection?
Share the essentials below. WhatsApp then opens with your project details ready to send; attach photographs in the chat.
+91 99209 18086A better first step